GR TUBE
- All continuous chains are supplied without stoppers
- 38mm tube (up to 1810mm width) spline fitted fabric
- 45mm tube (over 1810mm wide, up to 6m2) spline fitted fabric
- 49mm tube (over 6m2) heavy duty double-sided tape used to attach the fabric
STANDARD PROJECTIONS
Refer to detail gallery for standard projection information
MEASURING
- Pin size, outside of bracket to outside of bracket
- Skin size, edge of fabric to edge of fabric
LIMITATION
- Max width is 2910mm (subject to fabric width)
- Max drop is 3200mm
- Min width is 200mm
BRACKET COLOURS
White, ivory, beige, grey, and black. If bracket colour is not nominated on the order the factory will colour match. Bracket covers are standard with face fit only, covers are not supplied with reveal fit blinds.
LIGHT GAPS
- Outside of Drive end bracket to skin : 17mm
- Outside of idle end bracket to skin : 14mm
- Idle end skin to idle end skin (separate blinds) : 28mm
- Idle end skin to idle end skin (coupled blinds) : 18mm Dependent
- Link blinds : 20mm Dependent
| Bracket | 38mm Diameter Gear Reduction Tube System | 45mm Diameter Gear Reduction Tube System | ||||||||
| Standard | 38mm Dual | Dependent Linked | Independent Linked | Dep & Ind Linked | Standard | 50mm Dual | Dependent Linked | Independent Linked | Dep & Ind Linked | |
| Minimum Width | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
| Maximum Width (contigent on fabric) | 1810 | 1810 | 1810 | 1810 | 1810 | 3000 | 3000 | 3000 | 3000 | 3000 |
| Maximum Drop | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 | 3200 |
| Maximum Linked Blinds | – | – | 2 | 2 | 4 | – | – | 3 | 2 | 4 |
| Max Combined area of linked blinds | 6m2 | 6m2 | 6m2 | 12m2 | 12m2 | 6m2 | 6m2 | 12m2 | 12m2 | 12m2 |
| Motorized (Minimum) | N/A | N/A | N/A | N/A | N/A | 700 | 700 | 700 | 700 | 700 |
| Standard Projection – Face Fit | 68mm | 150mm | 68mm | 68mm | 68mm | 68mm | 150mm | 68mm | 68mm | 68mm |
| Standard Projection – Reveal Fit | 51mm | 120mm | 51mm | 51mm | 51mm | 51mm | 120mm | 51mm | 51mm | 51mm |
| Bracket Colours | White, Ivory, Beige, Grey, & Black | |||||||||
| Brackets | 38mm Diameter Gear Reduction Tube System | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Standard | 50mm Dual | Dependent Linked | Independent Linked | Dep & Ind Linked | ||||||
| Minimum Width | 200 | 200 | 200 | 200 | 200 | |||||
| Maximum Width (contigent on fabric) | 3000 | 3000 | 3000 | 3000 | 3000 | |||||
| Maximum Drop | 3200 | 3200 | 3200 | 3200 | 3200 | |||||
| Maximum Linked Blinds | – | – | 3 | 2 | 4 | |||||
| Max Combined Area Of Linked Blinds | 9.6m2 | 9.6m2 | 12m2 | 19.2m2 | 19.2m2 | |||||
| Motorized (Minimum) | 700 | 700 | 700 | 700 | 700 | |||||
| Standard Projection – Face Fit | 68mm | 150mm | 68mm | 68mm | 68mm | |||||
| Standard Projection – Reveal Fit | 51mm | 120mm | 51mm | 51mm | 51mm | |||||
| Bracket Colours | White, Ivory, Beige, Grey, & Black | |||||||||
FABRIC WAVE
Large roller blinds will show fabric wavering, this is because it is impossible to make a large piece of fabric hang perfectly flat. This generally appears on rollers with widths greater than 2000mm and/or drops greater than 3000mm. Consider splitting the blind into two smaller widths and linking them together.
FABRIC PATTERNS
For a roller blind with a patterned fabric, the pattern grain won’t usually line up perfectly with the horizontal or vertical edges of the blind. Expect to see a variation of up to a few centimeters along the pattern direction from one side of the blind to the other.
OVERALL MEASUREMENTS
It will be assumed that all the provided widths are ‘opening size’, factory takes all deductions unless make size specified.
LIGHT BLEED
All roller blinds allow light to pass around the sides of the fabric (even with blockout fabric). Consider using face fit as an option rather than reveal fit.
CUPPING
Roller blinds with blockout fabrics will usually show some cupping on each of the vertical edges. Cupping of up to a few centimeters will be considered within an acceptable allowance.
BAY WINDOWS
When measuring blinds for a bay window you are required to calculate the width deductions. Accurate measurements are important to ensure the blind fits on install; it is important to specify if the provided measurements are taken from the front or the back of the reveal. DO NOT supply measurements taken from a mid-point in the reveal.
GENERAL MAINTENANCE
Most roller blinds simply require regular vacuuming with an upholstery attachment.
STAIN REMOVAL
To remove, sponge blind clean with a damp cloth. Use diluted washing liquid in warm water & avoid rubbing the stain. Do not immerse blinds in water.
SPOT CLEANING
Small dry marks may be rubbed off with a gum-based eraser.